Gruenberg
Gruenberg
Product details
The Industrial Batch Ovens have for years been meeting a variety of test and production applications. Their reliability and fine performance have made them the choice of many industries.
Construction
- Heavy-gauge steel exterior and interior panels
- Welded 14 and 16 gauge cold-rolled steel exterior
- Stainless steel-reinforced Type 304 interior
- Fiberglass insulation - 4 full inches minimizes heat loss
- Double-wall insulated doors (double doors) are utilized on 48-inch wide models
- Side-mounted control compartment for easier control access on 60 and 96 cu. ft. models
- Manually adjustable intake/exhaust system
Standard Batch Oven Options
- Stainless steel slotted shelves
- High power for fast heat-up, high exhaust for large loads
- Door switch
- Motorized intake damper (2 position or proportional)
- Welded and sealed inner chamber (vapor-tight)
- 24-hour, 7-day programmable time
- Circular chart recorder-10"
- Reverse door hinge
- Redundant over-temperature protection
Engineered Oven Options
- Additional lead-in ports
- Interior light
- Glass observation panel(s)
- Rear access door(s)
- All stainless steel construction
- Special controls systems
- Multi-door configurations for process flexibility
- High-temperature capability of 399°C (750°F)
Roll-In Rack Options
- Stainless steel roll-in racks
- Roll-in rack shelves
- Special truck channel or flat uninsulated floor for customer designed racks
- Custom designed roll-in racks for product fixturing
- Pass-through "tunnel" design with front and rear doors
| GENERAL SPECIFICATIONS | ||
|---|---|---|
| Standard temperature range | 15°C (27°F) above ambient to 316°C (600°F) | |
| High temperature model temperature range | 15°C (27°F) above ambient to 399°C (750°F) | |
| Control accuracy | +/-1.0°C (+/-1.8°F) | |
| Resolution | +/- 0.1°C (+/- 0.1°F) | |
| Workspace capacity | 16.0 to 96.0 cubic feet | |
| Heat up time to 316°C (600°F) | 60 minutes or less depending on model and voltage, empty chamber | |
| Uniformity | Blue M can provide varying levels of uniformity; if you have a specific tolerance or specification which must be met, please contact us with your requirements so we can ensure the equipment is designed, tested, and adjusted to meet those requirements | |
| DIMENSIONAL SPECIFICATIONS | ||||||
|---|---|---|---|---|---|---|
| Model | 166 | 246 | 326 | 366 | 606 | 966 |
| Interior Volume | 16.0 cu. ft. | 24.0 cu. ft. | 32.0 cu. ft. | 36.0 cu. ft. | 60.0 cu. ft. | 96.0 cu. ft. |
| Interior Dimensions WxDxH in(mm) |
24 x 24 x 48 (610 x 610 x 1219) |
36 x 24 x 48 (914 x 610 x 1219) |
48 x 24 x 48 (1219 x 610 x 1219) |
36 x 36 x 48 (914 x 914 x 1219) |
36 x 48 x 60 (914 x 1219 x 1524) |
48 x 48 x 72 (1219 x 1219 x 1829) |
| Exterior Dimensions WxDxH in(mm) |
46 x 39 x 85 (1168 x 991 x 2159) |
58 x 39 x 85 (1473 x 991 x 2159) |
70 x 39 x 85 (1778 x 991 x 2159) |
58 x 52 x 85 (1473 x 1321 x 2159) |
79 x 63 x 93 (2007 x 1600 x 2362) |
91 x 63 x 105 (2311 x 1600 x 2667) |
| Machine Footprint | 12.5 sq. ft. | 15.7 sq. ft. | 19.0 sq. ft. | 20.9 sq. ft. | 34.6 sq. ft. | 39.8 sq. ft. |
| ELECTRICAL SERVICE | ||||||
|---|---|---|---|---|---|---|
| 208 VAC 3 Ph 60 Hz Line current |
9.0 kW 30 |
10.5 kW 34 |
13.5 kW 42 |
13.5 kW 42 |
18.0 kW 60 |
N/A |
| 240 VAC 3 Ph 60 Hz Line current |
12.0 kW 33 |
14.0 kW 38 |
18.0 kW 47 |
18.0 kW 47 |
24.0 kW 66 |
N/A |
| 480 VAC 3 Ph 60 Hz Line current |
12.0 kW 17 |
14.0 kW 19 |
18.0 kW 24 |
18.0 kW 24 |
24.0 kW 33 |
32.0 kW 43 |
The Industrial Batch Ovens have for years been meeting a variety of test and production applications. Their reliability and fine performance have made them the choice of many industries.
Construction
- Heavy-gauge steel exterior and interior panels
- Welded 14 and 16 gauge cold-rolled steel exterior
- Stainless steel-reinforced Type 304 interior
- Fiberglass insulation - 4 full inches minimizes heat loss
- Double-wall insulated doors (double doors) are utilized on 48-inch wide models
- Side-mounted control compartment for easier control access on 60 and 96 cu. ft. models
- Manually adjustable intake/exhaust system
Standard Batch Oven Options
- Stainless steel slotted shelves
- High power for fast heat-up, high exhaust for large loads
- Door switch
- Motorized intake damper (2 position or proportional)
- Welded and sealed inner chamber (vapor-tight)
- 24-hour, 7-day programmable time
- Circular chart recorder-10"
- Reverse door hinge
- Redundant over-temperature protection
Engineered Oven Options
- Additional lead-in ports
- Interior light
- Glass observation panel(s)
- Rear access door(s)
- All stainless steel construction
- Special controls systems
- Multi-door configurations for process flexibility
- High-temperature capability of 399°C (750°F)
Roll-In Rack Options
- Stainless steel roll-in racks
- Roll-in rack shelves
- Special truck channel or flat uninsulated floor for customer designed racks
- Custom designed roll-in racks for product fixturing
- Pass-through "tunnel" design with front and rear doors
| GENERAL SPECIFICATIONS | ||
|---|---|---|
| Standard temperature range | 15°C (27°F) above ambient to 316°C (600°F) | |
| High temperature model temperature range | 15°C (27°F) above ambient to 399°C (750°F) | |
| Control accuracy | +/-1.0°C (+/-1.8°F) | |
| Resolution | +/- 0.1°C (+/- 0.1°F) | |
| Workspace capacity | 16.0 to 96.0 cubic feet | |
| Heat up time to 316°C (600°F) | 60 minutes or less depending on model and voltage, empty chamber | |
| Uniformity | Blue M can provide varying levels of uniformity; if you have a specific tolerance or specification which must be met, please contact us with your requirements so we can ensure the equipment is designed, tested, and adjusted to meet those requirements | |
| DIMENSIONAL SPECIFICATIONS | ||||||
|---|---|---|---|---|---|---|
| Model | 166 | 246 | 326 | 366 | 606 | 966 |
| Interior Volume | 16.0 cu. ft. | 24.0 cu. ft. | 32.0 cu. ft. | 36.0 cu. ft. | 60.0 cu. ft. | 96.0 cu. ft. |
| Interior Dimensions WxDxH in(mm) |
24 x 24 x 48 (610 x 610 x 1219) |
36 x 24 x 48 (914 x 610 x 1219) |
48 x 24 x 48 (1219 x 610 x 1219) |
36 x 36 x 48 (914 x 914 x 1219) |
36 x 48 x 60 (914 x 1219 x 1524) |
48 x 48 x 72 (1219 x 1219 x 1829) |
| Exterior Dimensions WxDxH in(mm) |
46 x 39 x 85 (1168 x 991 x 2159) |
58 x 39 x 85 (1473 x 991 x 2159) |
70 x 39 x 85 (1778 x 991 x 2159) |
58 x 52 x 85 (1473 x 1321 x 2159) |
79 x 63 x 93 (2007 x 1600 x 2362) |
91 x 63 x 105 (2311 x 1600 x 2667) |
| Machine Footprint | 12.5 sq. ft. | 15.7 sq. ft. | 19.0 sq. ft. | 20.9 sq. ft. | 34.6 sq. ft. | 39.8 sq. ft. |
| ELECTRICAL SERVICE | ||||||
|---|---|---|---|---|---|---|
| 208 VAC 3 Ph 60 Hz Line current |
9.0 kW 30 |
10.5 kW 34 |
13.5 kW 42 |
13.5 kW 42 |
18.0 kW 60 |
N/A |
| 240 VAC 3 Ph 60 Hz Line current |
12.0 kW 33 |
14.0 kW 38 |
18.0 kW 47 |
18.0 kW 47 |
24.0 kW 66 |
N/A |
| 480 VAC 3 Ph 60 Hz Line current |
12.0 kW 17 |
14.0 kW 19 |
18.0 kW 24 |
18.0 kW 24 |
24.0 kW 33 |
32.0 kW 43 |
Features & Benefits
Features
- Nichrome wire heater elements for durability
- Centrifugal type blower wheel for efficient airflow through the system
- Horizontal airflow
- One-pass airflow
- Infinitely variable control (from full recirculation to full one pass) and optional automatic motorized damper for flexibility with your process
- Side-mounted control compartment for easier control access (60 and 96 cu. ft. models only)
- Profiling or single setpoint controls
- Direct drive blower
- Manually adjustable intake/exhaust system for ease of balancing
- Enclosed wiring to meet National Electric Code (NEC) for safe operation
Benefits
- Standard Cabinet Oven (Model DC), available in an array of sizes
- Standard options available for a High Power, a High Temperature (750°F maximum), and a Truck-In (DCRI) version
- High volume horizontal air recirculation system and electric heating system allow for maximum temperature uniformity in performance
- Differential airflow switch if loss of airflow is detected and shuts down oven's heaters
- Excellent reliability and performance ratings
Application & Industries
Applications
- Aging
- Annealing
- ASTM Testing
- Curing
- Drying
- Photo Resist
- Solvents, Coatings, and Paint Curing
- Stress-Relief